Vertical Place Style Electric Holding Furnace Hbf105-14 Type Sintering Furnace for Temperature Treatment at 1500 ordm C
Overview The HBF105-14 Type Sintering Furnace uses silicon molybdenum rods, which are resistant to acids and alkalis, with good uniformity and simple operation. It is suitable for various laboratories and small-batch production processes. Main Parameters Product Model: HBF105-14 Type Sintering Furnace External Dimensions: 850 * 900 * 1200mm (W×H×D) Effective Chamber Size: 400 * 330 * 800mm (W×H×D) Rated Temperature: 1300ºC Maximum Temperature: 1500ºC Heating Element: Silicon Molybdenum Rod Number of Heating Zones: 1 Maximum Heating Power: 23kW Cooling Method: Natural Cooling with the Furnace Heating Rate: ≤10ºC/min Power Supply: Capacity greater than 30kVA, three-phase five-wire 220/380V, 50Hz 
| Item | pecifications | Quantity | Notes |
| Kiln Main Unit | Primary heating system | 1 set | Core equipment for thermal process
|
| Setter Plate | Material: Corundum-Mullite | 1 set | High-temperature resistant carrier |
Installation and Usage Conditions
- The equipment must be installed indoors, with an ambient temperature of -10ºC to 45ºC. The indoor environment should be free of flammable gases, corrosive gases, and steam.
- The equipment requires a floor area of no less than 4 square meters, with a working space length of no less than 2 meters, width of no less than 2 meters, and height of no less than 3 meters. The foundation should be sturdy and level, with the furnace weighing approximately 400kg.
- The power supply for this furnace must be a three-phase five-wire AC power line, 380±10%V, 50±2%Hz. This power line should be dedicated, and large power conversion equipment such as welding machines, electric furnaces, and metal cutting machines should not be connected to this distribution.
- The equipment must be reliably grounded.
