Vertical High Temperature Industrial Furnace 1150 ordm C Mbf40-11n Type Atmosphere Box Furnace with ISO Certification
1. Applications:
It is primarily used for the sintering process of lithium battery cathode and anode materials, and is also applicable for the sintering processes of magnetic materials, electronic components, electronic ceramics, and other related products.
2. Mainly Specifics: - Rated Temp:200-1100ºC
- Max Temp: 1150ºC
- Effective Dimensions: 330 × 200 × 660mm(W×H×D)
- Heating Method: ceramic tube-encased silicon carbide rod.
- Furnace Chamber Material: Inner layer made of alumina products, outer layer constructed with ceramic fiber inorganic standard panels
- Process Atmosphere: Air or Nitrogen
- Temperature Control Stability: The imported temperature control module boasts a temperature regulation precision of ±1°C and features PID parameter auto-tuning functionality.
- Temperature Uniformity: better than ±5ºC
- Thermocouple: Type N
- Temperature control points: The temperature is controlled at the upper and lower points, with a single temperature measurement point in the middle.
- Process Steps: 9 steps
- Oxygen Content Detection: Configure a micro-oxygen analyzer to monitor the oxygen content inside the furnace chamber in real time.
- Exhaust: The top of the furnace is designed with an exhaust chimney, which allows for manual adjustment of the exhaust volume.
- Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection, over temperature heating power will turn off automatically
- Max Heating Power: ≤25kW.
- Surface Temperature Rise: ≤ 40ºC.
- Power Supply Requirements: Three-phase, 220/380VAC, 50Hz, greater than 35kVA, with phase-shift control.
| 3. Delivery List |
| | Item | Note | QTY |
| Basic Compositions | Furnace | | 1 Unit |
| Certificates of Inspection | Furnace and major purchased components | 1 Set |
| Technical Documents | Furnace specifications, technical documents of major purchased components, etc | 1 Set |
| Key Parts | Heating Elements | ceramic tube-encased silicon carbide rod | 1 Set |
| Temperature Controller | Azbil | 1 Set |
| touch screen | | 1 Set |
| Spares | silicon carbide rod | | 2 PC |
4. Facility Requirements
1 .Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
2 .Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 4 - 12m3 /h.
3 .Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 15m3 /h;
4 .Power conditions: capacity greater than 35kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green; 5 .Installation site: 2500mm×2000mm×3000mm (W×H×D), installation area greater than 5m2.
