Air Atmosphere 860*1750*1220mm Chitherm Mbf60-10 Sintering Box Furnace for Industrial Applications
1. Applications:
Mainly used for electronic components, ceramic filters in high temperature binder burn off and sintering process.
2. Mainly Specifics:
- Rated Temp.: 900ºC
- Max Temp.: 1000ºC
- Effective Dimensions: 350 × 300 × 550mm(W×H×D)
- Heating Method: Heating Plate within resistance alloy wires
- Process Atmosphere: Air
- Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
- Temperature Uniformity: better than ±5ºC (insulation 2 hours at 900ºC test)
- Thermocouple: Type K
- Temperature control points: 1
- Temperature measurement points: 1 point
- Process Steps: 9 steps
- Exhaust: One exhaust port with auto cover
- Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection, over temperature heating power will turn off automatically
- Max Heating Power: 16kW
- Insulation Power: ≤ 8kW
- Surface Temperature Rise: ≤ 35ºC
- Weight: about 400kg
- Furnace Dimensions: about 860×1750×1220mm (W×H×D);
- Appearance Color: light gray
| 3. Delivery List |
| |
Item |
Note |
QTY |
| Basic Compositions |
Furnace |
|
1 PC |
| Certificates of Inspection |
Furnace and major purchased components |
1 Set |
| Technical Documents |
Furnace specifications, technical documents of major purchased components, etc |
1 Set |
| Key Parts |
Heating Elements |
Heating Plate within resistance alloy wires |
1 Set |
| Thermocouple |
WATLOW/THERMOWAY, Type K |
1 PC |
| Temperature Controller |
CHINO |
1 Set |
| Monitor |
Proface 8" touch screen |
1 Set |
| Spares |
SSR |
|
1 PC |
4. Facility Requirements
4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
4.2 Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m3 /h.
4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m3 /h;
4.4 Ground requirements: level, no obvious vibration, bearing capacity > 250Kg/m2 .
4.5 Power conditions: capacity greater than 22kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
4.6 Installation site: 1800mm×1850mm×3000mm (W×H×D), installation area greater than 3.5m2.
