Ceramic Sintering Chitherm Mbf20-11n Controlled Atmosphere Box Furnace 50 Sets/Year Capacity and Performance
1. Applications:
Mainly used for electronic components, ceramic filters in high temperature binder burn off and sintering process.
2. Mainly Specifics:
- Rated Temp.: 1000ºC
- Max Temp.: 1100ºC
- Effective Dimensions: 330 × 200 × 330mm(W×H×D)
- Heating Method: SiC Rods
- Process Atmosphere: Nitrogen
- Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
- Temperature Uniformity: better than ±5ºC (insulation 2 hours at 1000ºC test)
- Thermocouple: Type N
- Temperature control points: 3 points
- Temperature measurement points: 1 point
- Process Steps: 4×16 steps
- Oxygen Content: ≤ 20ppm+gas supply oxygen content
- Exhaust: One exhaust port with manual adjustment
- Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection, over temperature heating power will turn off automatically
- Max Heating Power: 12kW
- Insulation Power: ≤ 5kW
- Surface Temperature Rise: ≤ 35ºC
- Weight: about 650kg
- Furnace Dimensions: about 1300*1900*1160mm (W×H×D);
- Appearance Color: light gray
| 3. Delivery List |
|
Item |
Note |
QTY |
| Basic Compositions |
Furnace |
|
1 PC |
| Certificates of Inspection |
Furnace and major purchased components |
1 Set |
| Technical Documents |
Furnace specifications, technical documents of major purchased components, etc |
1 Set |
| Key Parts |
Heating Elements |
SiC Rods |
1 Set |
| Thermocouple |
WATLOW/THERMOWAY, Type N |
1 PC |
| Temperature Controller |
Azbil |
1 Set |
| Monitor |
Proface touch screen |
1 Set |
| Spares |
SSR |
|
1 PC |
4. Facility Requirements4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strongairflow disturbance.4.2 Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 2 - 5m3 /h.4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greaterthan 20m3 /h;4.4 Ground requirements: level, no obvious vibration, bearing capacity > 250Kg/m2 .4.5 Power conditions: capacity greater than 16kVA, 3 phases 5 lines, voltage 220/380V, frequency50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;4.6 Installation site: 2000mm×2000mm×3000mm (W×H×D), installation area greater than 4m2.
