RTF3042-0610 Rotary Furnace with Usage Temperature up to 900 ordm C and Effective Chamber Dimensions Inner Diameter Phi
1.Summary:
The RTF3042 - 0610 rotary furnace is suitable for the sintering of electronic products at and below 1100°C, and is also applicable to heat treatment in controllable atmospheres in sectors such as electronics, chemical engineering, machinery, and scientific research. This product employs advanced infrared technology and advanced furnace lining materials, enhancing the thermal efficiency of the equipment; it utilizes advanced temperature control technology to ensure the precision of temperature control; by using mature furnace body design technology, it guarantees the uniformity of furnace temperature; with the use of a large-diameter quartz furnace tube, it ensures the cleanliness of products, thereby guaranteeing the sintering quality of products.
2. Performance Parameters
- Maximum Temperature: 1000°C
- Operating Temperature: RT~900°C
- Actual Furnace Tube Size: Φ300mm×4230mm
- Heating Zone Length: 2770mm
- Number of Temperature Zones: 6 zones, K-type thermocouple
- Temperature Control Accuracy: ±1°C
- Temperature Control Method: Each zone uses a Shimaden temperature controller from Japan, with adjustable heating rate
- Heating Method: Far-infrared FEC heater
- Furnace Atmosphere: Air
- Outlet Cooling Method: Air cooling
3. Equipment Requirements
- Design Power: 48kW
- Insulation Power: 24kW
- Power Supply: 380V±10%, 50Hz, 3-phase 5-wire
4. Heating and Insulation
- Heating Element: Far-infrared FEC heater
5. Control Features
- Control Method: Imported single-loop intelligent temperature controller with PID auto-tuning
- Controlled Zones: 6 groups of far-infrared FEC heaters to ensure uniform heating
- Alarm Protection: Audible and visual alarms for thermocouple breakage, overtemperature, etc.
- Surface Temperature Rise: ≤35°C
6. Furnace Layout
- Transition Cooling Zone: 1 zone, approximately 840mm in length
- Heating Zone: 6 zones, approximately 2770mm in length; temperature setting range RT~900°C
7. Atmosphere System
- Working Atmosphere: Clean, dry, oil-free compressed air, pressure 0.4~0.8Mpa, flow rate 3~7m³/h
- Controlled Atmosphere: 1 path, controlled by a glass rotor flow meter
8. Equipment Conditions
- Input Power: 380V±10%, 50Hz, 3-phase 5-wire
- Dimensions: 6200×1215×2475mm (L×W×H)
- Equipment Weight: Approximately 2100Kg
- Floor Load Capacity: 300Kg/m²
- Operating Environment: Flat floor, indoor environment with minimal air disturbance, no corrosive gases, minimal vibration, electrical control room temperature 0~40°C, humidity 10%~85%RH
- Ventilation and Exhaust: Furnace environment with good ventilation, ambient temperature ≤50°C, humidity 10~85%RH
Delivery List
| | Item | Note | Qty. |
| Basic Components | Furnace | | 1 SET |
| inspection certificate | Certificate of major outsourced components | 1 SET |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1 SET |
| Key Components | Heating Element | | 1 SET |
| Touch Screen | | 1 SET |
| Temperature Controller | | 1 SET |
| Quartz tube | SiO2 | 1 PC |
| Reducer motor | | 1 SET |
| Spare Parts | SSR | | 1 PC |
