Upgrade Your Capacitor Sintering Process with the Bf580-17 Type Temperature Bell Furnace in Air and O2 Atmosphere
1. Application:
The equipment is widely used in high-temperature sintering processes for advanced ceramics, magnetic materials, electronic ceramic components, and other products. 2. Technical Specification: - Effective Size: 1200×600×800mm (D×H×W)
- Rated Temperature: 1700ºC
- Maximum Temperature: 1750ºC
- Number of Temperature Control Points: 2 points
- Furnace Temperature Uniformity: +5ºC within the effective space, tested under no-load conditions at a 1700ºC platform for 2 hours
- Temperature Control Accuracy: ±1ºC (during high-temperature platform stage)
- Control Method: Phase-Shift Control
- Heating Elements: Heating Elements
- Control Instrument: Imported Intelligent Temperature Controller from Japan
- Alarm Protection: Audible and visual alarms for over-temperature, thermocouple break, overload, over-travel, deviation, etc.
- Thermocouple Type: B Index
- Atmosphere System: Air / Oxygen
- External Dimensions: 2880×3600×2240, excluding tracks and control cabinet
- Number of Gas Inlet Points: 20 points in total on opposite sides of the furnace body (10 points on each side)
- Operating Power Supply: 220/380VAC 50Hz
- Maximum Power: 120kW
- Equipment Weight: Approximately 8000kg
3. Delivery List | Table 1 Delivery list |
| | Item | Note | Qty. |
| Basic Components | Furnace | | 1 SET |
| Inspection Certificates | Certificates of major outsourced components | 1 SET |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1 SET |
| Key Components | Silicon molybdenum rod | U-shaped silicon molybdenum heater | 1 SET |
| Power regulator | | 1 SET |
| Thermocouple | | 1 SET |
| temperature controller | Island Electric, Dahua Qianye, Eurofins and other similar brands | 1 SET |
| PLC | SIEMENS | 1 SET |
| Touch Screen | 15 cun | 1 SET |
| Spare Parts | Heating Element | U-shaped silicon molybdenum heater | 1 PC |
4. Equipment Installation and Usage Conditions - The equipment must be installed indoors, with an ambient temperature of 0ºC to 40ºC. The indoor environment should be free of flammable gases, corrosive gases, and steam.
- The equipment requires a floor area of no less than 20 square meters, with a working space length of no less than 5 meters, width of no less than 4 meters, and height of no less than 4 meters. The foundation should be sturdy and level, with the furnace weighing approximately 8000kg.
- The power supply for this furnace must be a three-phase five-wire AC power line, 160kVA, 220/380±10%VAC, 50±2%Hz. This power line should be dedicated, and large power conversion equipment such as welding machines, electric furnaces, and metal cutting machines should not be connected to this distribution.
- The equipment must be reliably grounded.
- Environmental conditions: Temperature 0~40ºC, humidity ≤80%RH, no corrosive gases, and no strong airflow disturbances.
- Gas source conditions: Clean, dry, and oil-free compressed air, with an inlet pressure of 0.4~0.8Mpa and consumption of 10~30m³/h; high-purity oxygen (99.6%) with an inlet pressure of 0.2~0.4Mpa and consumption of 10~30m³/h.
- Ventilation system: Non-contact connection to the user's exhaust system, with an exhaust capacity greater than 50m³/h.
- Floor requirements: Level, with no significant vibrations, and a load-bearing capacity of >1000Kg/m².
- Power conditions: Capacity greater than 160kVA, three-phase five-wire, voltage 220/380V, frequency 50Hz; live wires: yellow, green, red; neutral wire: blue; ground wire: yellow-green.
- Installation site: 6000mm x 4000mm x 4000mm (D x W x H), with an installation area greater than 24m².
