Electric Holding Furnace Bf580-17 Temperature Treatment Furnace with Customization
1. Application:
The equipment is widely used in high-temperature sintering processes for advanced ceramics, magnetic materials, electronic ceramic components, and other products.
2. Technical Specification: Effective Chamber Size: 1200×600×800mm (D×H×W)
External Reference Dimensions: 2880×3600×2240, excluding tracks and control cabinet
Temperature Range: 1700ºC~1750ºC
Heating Method: Heating Elements
Number of Heating Zones: 1
Insulation Material: Alumina Products / Ceramic Fiber Material
Atmosphere: Air / Oxygen
Number of Control Points: 2
Temperature Control Instrument: Imported Intelligent Temperature Controller from Japan
Number of Gas Inlet Points: 20 points in total on opposite sides of the furnace body (10 points on each side)
Operating Power Supply: 220/380VAC 50Hz
Maximum Power: 120kW
Equipment Weight: Approximately 8000kg
3. Delivery List | Table 1 Delivery list |
| | Item | Note | Qty. |
| Basic Components | Furnace | | 1 SET |
| Inspection Certificates | Certificates of major outsourced components | 1 SET |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1 SET |
| Key Components | Silicon molybdenum rod | U-shaped silicon molybdenum heater | 1 SET |
| Power regulator | | 1 SET |
| Thermocouple | | 1 SET |
| temperature controller | Island Electric, Dahua Qianye, Eurofins and other similar brands | 1 SET |
| PLC | SIEMENS | 1 SET |
| Touch Screen | 15 cun | 1 SET |
| Spare Parts | Heating Element | U-shaped silicon molybdenum heater | 1 PC |
4. Equipment Normal Operating Conditions - Environmental Conditions: temperature: 0~40ºC, humidity≤ 80%RH, no corrosive gas, no strong airflow disturbance;
- Atmosphere Conditions: dry, clean, oil-free compressed air, working pressure of 0.4- 0.8MPa, gas consumption of 10 -30 m3/h;
- Ventilation System: Non contact access user exhaust system, with an exhaust capacity greater than 50 m3/h
- Ground Requirements: horizontal, no obvious vibration, load-bearing> 1000 Kg/m2;
- Power Condition(TBD): capacity > 160kVA, 3-phases 5-lines, voltage 220 / 380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
- Installation Site: 6000mm×4000mm×4000mm(D×W×H), with an installation area greater than 24m2.
