Electric Holding Furnace Hrf535-02n Nitrogen Dryer 850*700*900mm W*D*H Drying Oven Hot Air for Industrial
1. Applications:
Application fields: Widely used for drying, curing, and other processes of electronic products and similar items under constant temperature and oxygen-free environments. 2. Mainly Specifics: - Rated Temp.: RT+10 ~200ºC
- Effective Dimensions: 850×700×900mm(W×D×H)
- Heating Method: Custom-designed squirrel cage heater with built-in imported heating wire.
- Process Atmosphere: High-purity nitrogen gas can be introduced into the furnace chamber, with the inlet flow rate controlled by a glass rotameter (range: 24-240 LPM).
- Temperature Control Stability: ±1ºC
- Temperature Uniformity: better than ±3ºC (insulation 1 hour at 200ºC test)
- Thermocouple: Type K
- Temperature control points: 1
- Temperature monitoring points: 1 point
- Process Steps: 20 steps
- Exhaust: One exhaust port on top
- Alarm System: Audible and visual alarm protection against overtemperature, thermocouple break, motor overload, and other faults.
- Max Heating Power: 10kW
- Insulation Power: ≤ 5kW
- Surface Temperature Rise: <35ºC
- Furnace Dimensions: about 1550mm×1630mm×1050mm(W×H×D);
- Appearance Color: light gray
| 3. Delivery List |
| | Item | Note | QTY |
| Basic Compositions | Dryer | | 1 PC |
| Certificates of Inspection | Dryer and major purchased components | 1 Set |
| Technical Documents | Manual instructions, technical documents of major purchased components, etc | 1 Set |
| Key Parts | Heating Elements | heating wire. | 1 Set |
| Circulating fan | 4300m3/h | 1 PC |
| Temperature Controller | | 1 Set |
| Blower | 5.5m3/min | 1 Set |
| Monitor | Touch screen | 1 Set |
| Spares | SSR | | 1 PC |
4. Facility Requirements 4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance. 4.2 Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 5-15m3 /h. 4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater than 15m3 /h. 4.4 Ground requirements: level, no obvious vibration, bearing capacity >500Kg/m2 . 4.5 Power conditions: capacity greater than14kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green; 4.6 Installation site: 2500mm×2100mm×3000mm (W×H×D), installation area greater than 5m2.
