Hefei Chitherm Equipment Co., Ltd
Add to Cart
Electric Holding Furnace Htf1540-0311nh Tube Furnace Phi 150 times 2100mm Quartz for Customization
Typical Applications:
High-temperature sintering and heat treatment processes for glass insulators, ferrosilicon sheets, and similar products; also applicable to sintering processes of metal-cased dielectric ceramics under binary atmospheres.
Parameters and Features:
1.Rated temperature: 1000ºC;
2. Furnace tube dimensions: Φ150 × 2100 mm;
3.Number of temperature zones: 3;
4. Heating via FEC vacuum-formed ceramic fiber heaters with surrounding heating;
5.Single-zone and multi-zone designs with independent temperature control.
6.Flow Meter Range: Nitrogen 10-100LPM; Hydrogen 1-10LPM;
| Delivery Checklist | |||
| Name | Main Contents | Quantity | |
| Basic Components | Furnace Main Uni | 1 unit | |
| Inspection Certificates | Certificates for key purchased components | 1 set | |
| Technical Documents | User manual, technical documents for key purchased components, etc. | 1 set | |
| Key Components | FEC Heater | 1 set | |
| Temperature Controller | Shimaden SRS11 | 3 unit | |
| Quartz furnace tube | Φ150×2100mm | 1 set | |
| Spare Parts | Solid-State Relay (SSR) | 1 piece | |
| Heater | 1 set | ||
| Graphite plate | 100×100×6mm | 3 piece | |
Operating Conditions:
1.Environmental Conditions: Temperature 0-40ºC, Humidity ≤80% RH, no corrosive gases, no strong airflow disturbance;
2.Gas Supply Requirements:Nitrogen: 0.1-0.3 MPa, 99.999% high-purity nitrogen gas, consumption approx. 3-6 m³/h;Hydrogen: 0.1-0.3 MPa, consumption approx. 0.3-0.6 m³/h;
3.Water Supply Requirements: 0.1-0.3 MPa, flow rate 1-3 L/min;
4.Ventilation System: Non-contact exhaust system, exhaust capacity >7 m³/h;